PANEL
Bisschops Panel is an express jointed cladding system, for building facades, fascia’s and soffits in both the commercial and residential construction industry.
Commarc recommends the use of the James Hardie D3 100 fixing system.
Exotec panels come in a variety of sizes and thicknesses as standard, from 1800mm x 900mm panels to 3000mm x 1200mm. Panels can also be machine cut to any size to suit specific visual patterns required for visual impact.
Bisschops Panel is fixed using a colour matched class 3 pan head screw, as specified by James Hardie. Combined we both recommend a low sheen coating finish for maximum effect. On offer are various finishes including Polyurethane, Fluorethane, Metallics and graphical coatings with up to 15 year warranties. An almost unlimited colour range is achievable and desired samples can be colour matched.
The coatings are applied by our automated production line that ensures consistent application across an entire project. Samples are available in selected colours from admin@commarc.net.au
Lengthmm | Widthmm | Thicknessmm |
---|---|---|
900 | 9 | |
1800 | 1200 | 9 |
2100 | 1200 | 9 |
2400 | 900 | 9 |
2400 | 1200 | 9, 12 |
2700 | 1200 | 9 |
3000 | 900 | 9 |
3000 | 1200 | 9, 12 |
PAINT
Commarc uses James Hardie Exotec CFC panels as a substrate. CFC does have natural undulations in its surface, and these may be visible in our finished product. High gloss levels tend to magnify these natural undulations, this is why we recommend the use of a low sheen gloss level. Because the application of this product is sometimes beyond our control, Commarc cannot be held responsible for product field performance.
Bisschops Panel uses James Hardie Exotec as its primary substrate. This product is made in Australia to quality standards suitable for the Australian industry including conforming to all Non Combustible testing requirements.
You can be assured that your project is in safe hands with Bisschops Panel.




WARRANTY
POLYURATHANE COATINGS
GUARANTEED FOR 10 YEARS
FLUROPOLYMER COATINGS
GUARANTEED FOR 15 YEARS
PROJECT SPECIFIC WARRANTIES
ARE AVAILABLE ON REQUEST
Commarc uses JH Exotec CFC panels as a substrate.
CFC does have natural undulations in its surface, and these may be visible in our finished product. High gloss levels tend to magnify these natural undulations, this is why we recommend the use of a matt or low sheen gloss level. Because the application of this product is sometimes beyond our control, Commarc cannot be held responsible for product field performance.